FILTER

By Application

By Type

PRODUCTS

  • TPO
    JRCure-TPO
    • Type I
    • Description Photobleaching photoinitiator that offers good shelf stability, fast cure, good through cure and low yellowing. Phosphine oxides, such as JRCure TPO, are used in thick film applications. JRCure TPO also provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.
    • CAS no. 75980-60-8
    • Chemical name Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide
    • Appearance Pale yellow crystal
    • Applications Graphic Arts, Coatings, Electronics, Adhesives, 3D Printing
    • Melting Point (°C) 91-95
    • UV Absorption (nm) 244, 278, 322, 395
    • Reach Registered? Yes
    • Packaging 20kg/carton
    SHOW MORE SHOW LESS
  • 1173
    JRCure-1173
    • Type I 
    • Description Highly versatile, liquid photoinitiator that provides low yellowing and good surface cure when used at 0.5-5 wt% in UV curable formulations. JRCure 1173 shows similar reactivity to JRCure 184 and both are widely used in high quality coatings and varnishes. JRCure 1173 can be combined with other photoinitiators in thick films to overcome oxygen inhibition.
    • CAS no. 7473-98-5
    • Chemical name 2-Hydroxy-2-Methyl-Phenyl-Propane-1-one
    • Appearance Pale yellow liquid
    • Applications Graphic Arts, Coatings
    • Melting Point (°C) Liquid at Room Temperature
    • UV Absorption (nm) 244, 278, 322
    • Reach Registered? Yes
    • Packaging 25kg, 200kg/drum, 1000kg IBC
    SHOW MORE SHOW LESS
  • BDK
    JRCure-BDK
    • Type I
    • Description Good general-purpose photoinitiator that gives high reactivity and produces good hardness and gloss. JRCure BDK has a high thermal stability which gives excellent formulation stability.
    • CAS no. 24650-42-8
    • Chemical name 2,2-Dimethoxy-1,2-diphenylethan-1-one
    • Appearance White crystalline flake
    • Applications Graphic Arts, Coatings, Electronics, Adhesives, 3D Printing
    • Melting Point (°C) 64-67
    • UV Absorption (nm) 252, 325
    • Water solubility 66.32 mg/L at 25 °C
    • Reach Registered? Yes
    • Packaging 20kg/carton
    SHOW MORE SHOW LESS
  • BP
    JRCure-BP
    • Type II 
    • Description Cost effective, solid photoinitiator which has a good surface cure. JRCure BP has a low melting point and is able to form liquid eutectic pairs with many other photoinitiators.
    • CAS no. 119-61-9
    • Chemical name Benzophenone
    • Appearance White crystalline flake
    • Applications Graphic Arts, Coatings, Electronics, Adhesives, 3D Printing
    • Melting Point (°C) 46-49
    • UV Absorption (nm) 250, 335
    • Molecular Weight 182
    • Reach Registered? Yes
    • Packaging 25kg/bag
    SHOW MORE SHOW LESS
  • 784
    JRCure-784
    • Description Extremely reactive photoinitiator that is neither a Norrish Type I or II. JRCure 784 exhibits photobleaching properties and can be used to produce very thick coatings.  JRCure 784 is mainly used in high resolution micro electronics and polyimide formulations. UV, Visible light and LED cure.
    • CAS no. 125051-32-3
    • Chemical name Bis(cyclopentadienyl) bis [2,6-difluoro- 3-(1-pyrryl)phenyl titanium
    • Appearance Orange solid
    • Applications Graphic Arts, Electronics, Coatings, 3D Printing
    • Melting Point (°C) 164-170
    • UV Absorption (nm) 395, 405, 480
    • Reach Registered? No
    SHOW MORE SHOW LESS